Duikmateriaal
The FDX-i in-line design provides an improved flow rate, greatly reduced weight and more ergonomic port positioning for better hose routing when compared to the classic right angle first stages.
Precision Cold Forged
Reduced weight
Pneumatically balanced – consistent performance at any depth
Environmentally Sealed diaphragm – cold water ready
4 Low Pressure and 2 High Pressure Ports
Angled ports for ideal hose routing
Improved flow rate over standard right angle first stages.
FEATURES & FUNCTIONS FDX-i
Valve Type OVER-BALANCED DIAPHRAGM
Primary Material FORGED MARINE BRASS
Low Pressure Ports 4
High Pressure Ports 2
FIXED YOKE KNOB YES
Nitrox Compatibility STANDARD TO 40%
300 BAR DIN Fitting OPTIONAL
Sealed Valve Design YES
Environmental Protection YES
Weight (Yoke) 21 OUNCES
Factory Set Intermediate Pressure 138-142 PSI
Pressure Drop 9 PSI
Valve Type Over-Balanced Diaphragm
Pressure Ports LP 4, HP 2
Nitrox Compatibility Standard to 40%
Environmental Protection Sealed Valve Design
Warranty Lifetime & Free Parts for Life
Service Interval 2 Year, Required
Valve Type Over-Balanced Diaphragm
Pressure Ports LP 4, HP 2
Nitrox Compatibility Standard to 40%
Environmental Protection Sealed Valve Design
Warranty Lifetime & Free Parts for Life
Service Interval 2 Year, Required
First stage for dry suit inflation devices.
Two types of first stages:
DIN GAS 5/8 compact first stage with integrated low profile pressure relief valve. Two low (3/8 UNF) outputs (one of the outputs is already occupied by the pressure relief valve) and one high (7/16 UNF) output.
First stage W21.8 specific inert gas with integrated pressure relief valve. 1 high output (7/16 UNF) and 1 low output (3/8 UNF)
The machined Aluminum Regulator DIN Cap is machined lightweight aluminum and comes with the retainer string. The Aluminum Regulator DIN Cap comes in Red, Blue, Gold, Black and Silver!
Din cap for regulator black
Din cap delrin
Shutoff valve voor regulator hose
hermoformable mouthpiece for diving regulator
Thanks to the thermoformable mouthpiece for regulator, your regulator will be easier to hold.
You will gain comfort and safety.
To use the moldable expander mouthpiece, simply hold it in hot water for a few moments.
It must then be kept in the mouth while biting the mouthpiece. That's it, your mouthpiece is now adapted to your oral morphology.
To remold the thermoformable mouthpiece, just let it soften in very hot water!
Thermoformable regulator mouthpiece instructions for use
- Step 1: Insert the mouthpiece "UP" into the mouth, trimming the excess material so that it does not touch the back of the gum.
- Step 2: Hold the tip on the black handle and immerse the whole assembly for 10-20 seconds in hot water at 90/100°C. Do not remove the handle yet.
- Step 3: Remove the mouthpiece from the water, leaving it to cool for 6/15 seconds. Place tip in mouth and bite gently to shape.
- Step 4: After shaping, remove the black pins on the sides and handle. If the desired result is not achieved, repeat steps 1 to 4.
Zwart en doorzichtige siliconen mondstuk
Zwart en doorzichtige siliconen mondstuk
Siliconen mondstuk.
Mooi uiterlijk en goed comfort.
Twee materiaal, vloeibare siliconen injectie.
FDA goedgekeurd materiaal.
Kleur zwart