Duikmateriaal
IJzige kou is een goede reden om niet te duiken in het winter seizoen, maar nu niet meer! De Heated Dive Vest van Venture Heat is een heerlijk warme en stevige soft shell vest met verwarmingselementen op de borst en rug om te zorgen dat je lekker kunt blijven duiken in ijskoude temperaturen. Deze worden aangedreven door 2 oplaadbare accu’s en heeft een duur van 90-360 minuten. Hij kan in wel drie standen, van 39 graden tot 49 graden met een draadloze afstandsbediening. Daarnaast is hij ook 100% waterdicht tot 100 meter diepte. Dus natpak of droogpak, hij kan onder allebei.
Batterij D616A voor Venture Heat Dive Vest
Draadloze afstandsbediening voor Venture Heat Dive Vest
The SANTI BZ400 Heated Undersuit is designed as a part of the complex heating system consisting of at least an undersuit, SANTI Thermovalve or SANTI Connector and an external battery. This configuration allows a diver to wear the undersuit under the drysuit without dangers associated with internal batteries.
The heating undersuit outer shell is made of abrasion and tear resistant polyester Thinsulate™ 3M BZ 400 layer and micro fleece layer inside. The Heating undersuit is designed to be worn on top of thin form fitting thermal wear. It is not recommended to wear on naked body. In this configuration the majority of the heat output is transferred directly on diver’s torso, back and thighs.
Breathable Thinsulate fabric allows comfortable body heating and redirection of body sweat to the outside. Undersuit has high thermal properties even if it is switched off.
Available sizes:
XS, S, SL, M, ML, MLL, LS, L, LL, LLL, XLS, XL, XLL, XXLS, XXL, XXXL,
Made To Measure option available.
Technical info:
- maximum heating temperature 45°C,
- maximum heating power: 110 W,
- works with the following batteries:
24Ah battery: 2h30min ~ 3h of heating,
battery BluePower 14Ah: 1h30min of heating,
battery BluePower 28Ah: 3h of heating. - works only with the batteries of maximum voltage of 12V,
- safety switch preventing from overheating and too strong current,
- made of Thinsulate™ BZ400 (420g/m2),
- made of fully breathable materials,
- keeps you warm even when heating is switched off,
- regularly distributed heating wiring that allows you a free movement,
- warms up the whole torso, thighs and arms,
- extra pocket for the wire ends,
- waterproof plug, compatible with other SANTI products, flexible and overheating resistant wires,
- additional wires integrated to plug in the heating gloves in standard,
- P-valve holes on both sides in standard,
- two sides pockets,
- water-resistant cuffs,
- tapes which supply air to the dry gloves,
- two-way zip.
specification
SANTI Heated Undersuit Flex 2.0 is designed as part of complex SANTI Heating System which consists of such items as heated undersuit or heated vest, SANTI Thermovalve or SANTI Connector and external battery. This configuration allows a diver to use the heating system without any dangers of using the internal battery.
Latest product of SANTI being part of the Heating System, SANTI Heated Undersuit Flex 2.0 with the same inner heating technology as in BZ400 heated model, this undersuit is light and flexible, which increases divers comfort under a drysuit. Made of high quality 180g / m2 Flex fabric with additional insulation of the chest with a double layer of insulation, provides full flexibility of the material on every level which translates into exceptional mobility and smaller volume compared to our model made of Thinsulate insulation. The undersuit contains very efficient heating wires that provide optimal thermal comfort during long and cold dives. In this configuration, most of the generated heat is passed on directly on the diver’s body. We highly recommend this undersuit to those, who look for thinner alternative for a heating undersuit, plan shorter dives in cold waters or long demanding dives in warmer waters.
It is advised to wear the undersuit on top of thin thermal or wool base underwear. Lighter version of the undersuit thanks to new, non-quilted fabric quality provides more warmth towards the body. This generates better thermal feeling and causes heat retention on the body for longer. The Undersuit should not be worn directly on naked skin due to safety and hygienic reasons.
Available sizes:
XS, S, SL, M, ML, MLL, LS, L, LL, LLL, XLS, XL, XLL, XXLS, XXL, XXXL,
Made To Measure option available.
Features:
- maximum heating temperature 45°C,
- maximum heating power: 110 W,
- works with the following batteries:
24Ah battery: 2h30min ~ 3h of heating,
battery BluePower 14Ah: 1h30min of heating,
battery BluePower 28Ah: 3h of heating. - works only with the batteries of maximum voltage of 12V,
- safety switch preventing from overheating and too strong current,
- Flex 180g/m2 thermal insulation
- made of fully breathable materials,
- keeps you warm even when heating is switched off,
- regularly distributed heating wiring that allows you a free movement,
- warms up the whole torso, thighs and arms,
- extra pocket for the wire ends,
- waterproof plug, compatible with other SANTI products, flexible and overheating resistant wires,
- additional wires integrated to plug in the heating gloves in standard,
- p-valve hose openings on both sides,
- two sides pockets,
- water-resistant cuffs,
- tapes, which supply air to the dry gloves,
- two-way zip,
- elastic waistband.
specification
The Heated Gloves 2.0 are designed as a part of the complex heating system consisting of the gloves, SANTI Thermovalve or SANTI Connector and external battery. This configuration allows a diver to wear the heated gloves under the dry gloves without risks associated with internal batteries.
Available sizes:
XS, S, M, L, XL, 2XL
Features:
- maximum heating temperature: 45°C,
- 36 W power (per pair),
- run time with SANTI battery:
battery 6Ah: 1h45min ~ 2h of heating,
battery 24Ah: 9h ~10h of heating,
battery BluePower 14Ah: 5h of heating,
battery BluePower 28Ah: 10h of heating. - keep you warm even when the heating is off,
- evenly distributed heating wiring that allows for free hand movements,
- wires run on the external part of hands and fingers,
- waterproof plug compatible with other SANTI products,
- works with power supply no higher than 12V.
NOTE!
Works only with SANTI Thermovalve and SANTI Connector.
specification
SANTI Heated Vest 2.0 is a product for those who seek the ultimate comfort during long and cold dives.
New Flex 2.0 Heated Vest, designed as part of SANTI Heating System which consists of such components as heated undersuit or heated vest, SANTI Thermovalve or SANTI Connector and external battery supplying the system.
This configuration allows a diver to use the heating system without necessity of using any additional valves and without any dangers associated with internal battery system.
The vest is designed to ensure the top functionality and safety. Thanks to the fabrics used, the vest provides thermal comfort even if your battery is drained.
Made of very flexible Flex insulation fabric with weight of 180g/m2, it consists of three layers – breathable Climashield Contour insulation covered with two protective layers made of polyester from the inside and outside. The external layer has also windproof properties.
The latest version of SANTI Heated Vest, thanks to new, non-quilted fabric quality provides more warmth towards the body. It generates better thermal properties and keeps the body warm for longer.
Available sizes:
XS, S, M, L, XL, 2XL, 3XL
Features:
- Flex fabric – stretchable threads, resistant to wear and tear,
- weight 180g/m2, isolation: 0.96 CLO,
- side and crotch adjustable, rubber bands to allow best circumference and length adjustment,
- p-valve hose opening,
- maximum heating temperature: 45ºC,
- maximum heating power: 55W,
- battery running time:
SANTI 6Ah: 1h15min ~ 1h30min of heating,
SANTI 24Ah: 5 ~ 6h of heating,
BluePower 14Ah: 3h of heating,
BluePower 28Ah: 6h of heating. - safety switch preventing from overheating and too strong current,
- new generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking,
- innovative, synthetic power cable resistant to high temperatures and cuts, hidden in a handy pocket,
- ergonomic distribution of internal cables,
- special vest bag included.
- NOTE!
- Works only with SANTI Thermovalve and SANTI Connector.
specification
Drysuit inflation valve with integrated 12V connector.
- Available with APEKS or SI-TECH screw size,
- moveable head equipped with medium pressure connector,
- moveable head provides freedom in optimal and convenient arrangement of the E/O cord and the hose,
- made of two electrical connectors on opposite sides of the cable - used to connect with the battery adapted to underwater usage; and watertight connector to connect SANTI Heating System, exclusively,
- works with power supply no higher than 12V,
- total length of the cable including plugs - approx. 55cm,
- the set include a two piece nut.
Valve placement:
The inflation valve should be fitted on the chest area, where it can be easily reached. The place of fitting the valve needs to be of the right size and the rubber backing patch should be bonded to the outside of the drysuit with a suitable adhesive. When positioning the valve try to ensure that it is not covered by other pieces of diving equipment, affecting access to the valve.
Hose connection:
To mount the medium pressure hose to the end of the SANTI Thermovalve pull down the ring of the hose and slide it onto the end of the SANTI Thermovalve.
Valve operation:
Before each dive it is advisable to check the tightness of the drysuit valves to ensure leak free diving. You cannot dive with too much weight. Choose a safe, shallow place to test your buoyancy. Once in the water, on the surface blow sufficient air into your drysuit by pressing the button on the drysuit inflation valve to provide strong positive buoyancy.
Care And Maintenance:
SANTI Thermovalve works as a regular valve. Also, it allows for collision-free connection of the inner layers of diving gear (vest or undersuit) by means of properly integrated wiring which can be powered by the batteries up to 12V outside the drysuit.
down